Hydraulics transmissions :

No.                   Hydraulics transmissions                                    Present utilizations                           Possible utilizations           International similar products
1 HYDROMECHANICS TRANSMISSION type TH1

- Entrance revolution (from the motor)
  1000...1800 rpm
- Entrance power: 220...515 kW
  (300...700 HP)
- Exit maximum revolution (at 700 HP)
  2188 rpm
- Transformation report of the moments
  at the stopping Z/Zi =5
- Net Mass (without oil) aprox. 2280 kg
- Gauge:
   - Length cca. 1425 mm
   - Width cca. 960 mm
   - Height cca. 1420 mm
- Distance between entrance and exit
  shaft 650 mm

There can be made variants for any combination of values that are comprised in the above mentioned limits, for the entrance power and the revolution entrance.
FAUR hydraulic diesel locomotives type:
LDH, L45H, LDH 45 T, LDH 50 B,
LDH 70-M6, LDH 450, LDH 550,
LDH 600, LDH 750

Dredges
  (TH1-AR+ conic reducing gear RCD):

Dredge 119 m3/h, Dredge 600 m3/h,
Dredge 750 m3/h,
Any locomotive that has Voith transmission type L26/St/V: series 732, 733.

Any locomotive that whose transmission place has the necessary size for TH1, the distance between the engines shaft and the one entering in the reducing gear cca. 650 mm, the reducing gear entering part has the shape and the dimensions corresponding to the transmission and the reducing reverser can take over the power in the rate of exit revolutions of the transmission TH1.
Voith L26/St/V
2 HYDRAULICS TRANSMISSIONS type TH2

- Entrance revolution (from the engine):
  750...1600 rpm
- Entrance power: 440...956 kW
  (600...1300 HP)
- Maximum exit revolution (at 1300 HP):
  1950 rpm
- Transformation report of the moments
  at the stopping Z/Zi =5,1
- Mass net (without oil) aprox. 4100 kg
- Gauge:
   - Length cca. 1900 mm
   - Width cca. 930 mm
   - Height cca. 1840 mm
- Distance between entrance and exit
  shaft 723 mm

There can be made variants for any combination of values that are comprised in the above mentioned limits, for the entrance power and the revolution entrance.
FAUR hydraulic diesel locomotives type:
LDH 1100, LDH 1250,
LDH 1250 Mozambique, DH 110CR,
PZH95-CFR, LDH1450,
LDH1500 engine ALCO

Dump truck DAC100
Any locomotive that has Voith transmission type:
  L28/III4 –1,45/ St-10.

Any locomotive that whose transmission place has the necessary size for TH2, the distance between the engines shaft and the one entering in the reducing gear = 723 mm, the reducing gear entering part has the shape and the dimensions corresponding to the transmission and the reducing reversor can take over the power in the rate of exit revolutions of the TH2 transmission.
Voith: L28/III4 –1,45/ St-10
3 HYDRAULICS TRANSMISSIONS type TH5R, TH5M

- Entrance revolution (from the engine):
  1000...2100 rot/min
- Entrance power: 100...300 kW
  (136...408 HP)
- Transformation report of the moments
  at the stopping Z/Zi =2,6
- Mass net (without oil) aprox. 4100 kg
- Gauge:
   - Length cca. 1210 mm
   - Width cca. 630 mm
   - Height cca. 1100 mm
- Distance between entrance and exit
  shaft 420 mm.

There can be made variants for any combination of values that are comprised in the above mentioned limits, for the entrance power and the revolution entrance.
FAUR hydraulic diesel locomotives type: LDH18, LDH25, L30H600T

Locomotives modernized in EGYPT: Kyosan Kogyo(Japan)
Any locomotive that has the transmission corresponding to the size TH5R and has the reducing gear inverter or inverter in the axle attack, the distance between the engine’s shaft and the entrance in the reducing gear or the axle attack aprox. 420 mm and the transmission report of the reducing gear and/or of the axle attack corresponding to the demanded performances.